![]() |
||||||||
|
|
||||||||
Bare Surface Graffiti Remover
(BSGR)
|
||||||||
BSGR Prices |
|
| 5 Litre Container £75.00 |
20 Litre Container £280.00 |
Prices are Ex VAT and Delivery |
|
BSGR FEATURES
BSGR has been designed to remove graffiti from brick, concrete and stone - though it can be equally effective on other substrates.
BSGR is an aggressive solvent based cleaner: it is not suitable for use on previously painted surfaces or any surface that may be damaged by strong solvents.
Available in 5 or 20 litre sized containers.
After removal of graffiti appy Anti-Graffiti Paint to protect from future graffiti attacks.
Application
Do not apply to sensitive material such as plastic, perspex or previously painted surfaces. If in doubt contact the technical department of Graffiti Magic limited or carry out a small trial application.
Hold cloth over top whilst opening
Apply a thick coat by brush - for areas of heavy graffiti apply a second coat on the top of the first coat after a few minutes.
Leave until graffiti reacts – usually between 10 and 30 minutes.
Rinse off with copious amounts of water - for best results use a power washer
If a shadow remains then allow the surface to dry and apply BSGR again.
Clean all equipment with water immediately after use.
Coverage
Approximately 10 square meters per litre depending on porosity of surface.
Cleaning Tools
Health and Safety
See separate COSHH sheet prior to use - BSGR H&S Datasheet
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. We disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.
Part of the StormFlame Group
![]()